SIEMENS VFD G120_BOP STOCKIST IN DELHI

Description of the Siemens VFD G120_BOP Product.

SIEMENS VFD G120_BOP STOCKIST IN DELHI Drive commissioning, operating parameter modifications, and monitoring may all be done with the BOP-2 Basic Operator Panel. Standard drive commissioning is simple, with a menu-prompted dialogue and a two-line display. Basic drive commissioning may be completed quickly and, for the most part, without a printed parameter list thanks to parameter filtering and the simultaneous display of the parameter and parameter value.

The dedicated navigation buttons make it simple to manually operate the drives. The BOP-2 can be switched from automatic to manual mode with a special switchover button.

By choosing the settings, you can quickly conduct diagnostics on the connected converter.

It is possible to simultaneously visualise two process values numerically.

Standard commissioning of identical drives is supported by BOP-2. As a result, when necessary, a parameter list can be downloaded into other drive units of the same kind and uploaded from a converter into the BOP-2.

The BOP-2 operates between 0 °C and 50 °C (32 °F and 122 °F).

The hazardous chemicals detected in BOP-2 are included in environmental class 3C3 (IEC 60721-3C3: 2002).

Benefits

• Reduce commissioning delays by commissioning conventional drives quickly with simple commissioning wizards (setup).
• Reduce stoppage times by quickly identifying and fixing problems (Diagnostics)
• Increased process transparency: Process variables are easier to monitor thanks to the BOP-2 status display (Monitoring)
• installing straight onto the converter
• Interface that is easy to use:
  • Simple navigation, an easily readable menu structure, and easy-to-use control keys
  • Two-line display

Using the BOP-2 and SINAMICS G120 converters

Door installation

A door mounting kit is optional and a few simple manual procedures are all that are needed to swiftly and easily place a BOP‑2 in a control cabinet door. Door mounting satisfies IP55 security standards.

Data organisation and selection