SIEMENS VFD S210 DISTRIBUTOR IN NEW DELHI
A SIMOTICS S-1FK2, S-1FT2 or S-1FS2 servomotor, a SINAMICS S210 servo converter, and the corresponding MOTION-CONNECT One Cable Connection (OCC) to link the motor and converter make up the servo drive system. A single-axis AC/AC servo converter system with excellent performance and dynamic responsiveness is the SINAMICS S210.
Line voltages for which SINAMICS S210 servo converters are suitable include:
• Between 200 and 240 V One AC (one series of ACs)
• 200–480 volts Three AC (three AC series)
The SINAMICS S210 is a multifunctional, adaptable system. Rotating and linear axes are equipped with synchronous servomotors from the SIMOTICS S-1FK2, S-1FT2, or S-1FS2 family. One cable may be used to easily connect a SIMOTICS S-1FK2, S-1FT2, or S-1FS2 motor thanks to the incorporated One Cable Connection (OCC) interface. It is not necessary to parameterize the converter with the motor data because it is possible to read out the electronic motor type plate data. Commissioning is much shortened and simplified as a result.SIEMENS VFD S210 DISTRIBUTOR IN NEW DELHI
Together with the technological capabilities of the higher-level controller, a wide range of motion options are available. Coordinated motion of many axes using cyclic cams or interpolation, as well as continuous operation through positioning and synchronous operation, are all feasible.
Standardised protocols, the PROFIdrive profile for positioning mode and the PROFIsafe profile for safety-related communication, are used to exchange data with the higher-level controllers.
Thus, the SIMATIC S7 automation system provides excellent operating assurance. Technology objects and Motion Control blocks in the SIMATIC S7 or a SIMOTION controller are used to connect the driving axes.
The following characteristics contribute to the great performance of the SIMOTICS S-1FK2, S-1FT2, or S-1FS2 servomotor when used with the SINAMICS S210 servo drive system:
• Low moment of inertia and strong motor overload capacity
• Quick-scanning encoder with high resolution
• The current controller clock cycle is 62.5 μs, and the servo converter pulse frequency is 8 kHz.
Up to six converters' DC links may be connected for converters in the three AC series. As a result, it is feasible to balance the axes' energy and the energy generated during braking can be utilised by other axes to accelerate. Because the generated energy does not need to be converted to heat in the brake resistor, this is not only efficient but also lowers the waste heat in the control cabinet.SIEMENS VFD S210 DISTRIBUTOR IN NEW DELHI
In addition to the SINAMICS S210 servo converters that are currently on the market, a novel variation is currently offered under the moniker "SINAMICS S210 servo converter (New)".
With updated firmware V6.1, the SINAMICS S210 servo converters (improved) boast improved hardware and software that expands their functionality.SIEMENS VFD S210 DISTRIBUTOR IN NEW DELHI
• With internal braking resistors, operation on a supply voltage of 200 V to 240 V 3 AC is now feasible, for example, for the USA, Canada, and Japan.
There's no need for external braking resistors anymore.
• One interface for communication (as of firmware V6.3) with a second encoder
• For upcoming (as of right now, functional) extensions:
One PTC temperature sensor input
• Access control, user management, and security
• Updated web server
• Unification and general rounding off for the whole SINAMICS converter family
• Functional safety up to PL e, Category 4, and safety integrity level 3.
The Safety Integrated Basic Functions (SS1, SLS SDI, SSM) and Safety Integrated Extended Functions (SIEF) are included in Firmware V6.1.
According to firmware V6.3:
• A positioning feature included into the converter is called a basic positioner (EPos).
• Using Ethernet/IP to communicate with external controllers
Soon, more features will be accessible: Advanced Functions with Safety Integration